计量认证 ISO17025

Gibitre instrument计量实验室是*ACCREDIA校正实验室，用于校准：
•Shore A、Shore D测试仪符合ISO 7619-1和 ISO 868标准
•IRHD Micro、IRHD-Normal、IRHD- Hard和 IRHD-Low硬度计符合ISO 48标准。
校准在Gibitre instrument计量室（环境条件受控）中进行。
主要特点
•Gibitre对所有主要生产商生产的IRHD和邵氏测试仪进行Accredia校准。
•Gibitre拥有关于硬度计操纵和校准的可靠校准经验，且每年执行超过300次校准
•校准前和校准后测量的记录与校准证书一起
提供
•通过预先安排仪器的交付日期，可在收到后24小时内完成仪器的回运。
•不符合Accredia校准要求的仪器将退回，且不收取校准服务费。

Gibitre Instruments’ metrological laboratory is official ACCREDIA calibration laboratory for the calibration of:
• Shore A, Shore D, tester according to ISO 7619-1 and ISO 868 standards
• IRHD Micro, IRHD-Normal, IRHD-Hard, and IRHD-Low hardness testers according to ISO 48 standard.
Calibrations are performed in the metrology room of Gibitre Instruments, with controlled environmental conditions.
Key Features
• Gibitre performs Accredia calibration of IRHD and Shore testers produced by all the major world producers.
• Gibitre has a solid experience regarding the
manipulation and calibration of hardness testers and performs more than 300 calibrations per year
• Recording of pre-calibration and post-calibration measures are provided together with the Calibration certificate
• By pre-arranging the delivery date of the instruments
the back-shipment of the instrument can be done within 24 hours from delivery.
• Instruments that do not meet the Accredia calibration requirements are returned without charging calibration service.